Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EL5150IW-T7AIC OPAMP VFB 1 CIRCUIT SOT23-6 |
9,500 |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | Voltage Feedback | 1 | - | 100V/µs | 40 MHz | 200 MHz | 20 nA | 500 µV | 1.35mA | 70 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
EL5120IYEIC OPAMP VFB 1 CIRCUIT 8HMSOP |
25,243 |
|
Datasheet | - | 8-VSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 10V/µs | 8 MHz | 12 MHz | 2 nA | 2 mV | 500µA | 30 mA | 4.5 V | 16.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HMSOP |
|
EL5120IWT-T7AIC OPAMP VFB 1 CIRCUIT TSOT23-5 |
8,822 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 10V/µs | 8 MHz | 12 MHz | 2 nA | 2 mV | 500µA | 30 mA | 4.5 V | 16.5 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
EL5153IW-T7AIC OPAMP VFB 1 CIRCUIT SOT23-5 |
20,750 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 180V/µs | 165 MHz | 270 MHz | 120 nA | 500 µV | 3mA | 105 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
EL5157IW-T7AIC OPAMP VFB 1 CIRCUIT SOT23-5 |
9,750 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 700V/µs | 210 MHz | 600 MHz | 400 nA | 500 µV | 6mA | 140 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
EL5157IWZ-T7IC OPAMP VFB 1 CIRCUIT SOT23-5 |
21,000 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 700V/µs | 210 MHz | 600 MHz | 400 nA | 500 µV | 6mA | 140 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
EL5420CREL5420 - QUAD 12MHZ RAIL-RAIL OP |
2,350 |
|
Datasheet | EL5420 | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Voltage Feedback | 4 | Rail-to-Rail | 10V/µs | 8 MHz | 12 MHz | 2 pA | 2 mV | 500µA (x4 Channels) | - | 4.5 V | 16.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
ISL28166FHZ-T7IC OPAMP GP 1 CIRCUIT 6SOT |
688 |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.05V/µs | 250 kHz | - | 1.14 nA | 7 µV | 39µA | 31 mA | 2.4 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-SOT |
|
ICL7611DCBAIC OPAMP GP 1 CIRCUIT 8SOIC |
15,779 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | 40 mA | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ICL7611DCBA-TIC OPAMP GP 1 CIRCUIT 8SOIC |
3,150 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | 40 mA | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
