Comparators
Review Comparators Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Type | Number of Elements | Output Type | Voltage - Supply, Single/Dual (±) | Voltage - Input Offset (Max) | Current - Input Bias (Max) | Current - Output (Typ) | Current - Quiescent (Max) | CMRR, PSRR (Typ) | Propagation Delay (Max) | Hysteresis | Operating Temperature | Grade | Qualification | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX984CPE+IC COMPARATOR OD 16-DIP |
1,780 |
|
Datasheet | - | * | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MAX974CPE+IC COMPARATOR OD 16-DIP |
1,725 |
|
Datasheet | 16-DIP (0.300", 7.62mm) | - | Bulk | Obsolete | with Voltage Reference | 4 | Open-Drain | 2.5V ~ 11V, ±1.25V ~ 5.5V | 10mV @ 5V | - | - | 8.5µA | 80dB CMRR, 80dB PSRR | - | - | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
MAX973CSA-TG068MAX973 LOW-POWER COMPARATOR |
2,000 |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MXL1016CN8IC COMPARATOR 1 W/LATCH 8DIP |
2,148 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | with Latch | 1 | Complementary, TTL | 5V ~ 10V, ±2.5V ~ 5V | 3mV @ ±5V | 10µA @ ±5V | 20mA | 35mA | 96dB CMRR, 100dB PSRR | 14ns | - | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
MAX9691EPAIC COMPARATOR 1 W/LATCH 8DIP |
1,253 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | with Latch | 1 | Complementary, ECL | - | 6.5mV @ 5V | 20µA @ 5V | 50mA | 26mA | 80dB CMRR, 60dB PSRR | 1.8ns | - | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
MAX981EPA+IC COMPARATOR 1 W/VOLT REF 8DIP |
1,454 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Bulk | Obsolete | with Voltage Reference | 1 | - | 2.5V ~ 11V, ±1.25V ~ 5.5V | 10mV @ 5V | - | - | 4µA | 80dB CMRR, 80dB PSRR | - | 50mV | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MAX913CSAIC COMPARATOR 1 W/LATCH 8SOIC |
2,359 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | - | Tube | Obsolete | with Latch | 1 | Complementary, TTL | 5V ~ 10V | 2mV @ ±5V | 5µA @ ±5V | 20mA | 10mA | 110dB CMRR, 100dB PSRR | 14ns | - | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX913CPAIC COMPARATOR 1 W/LATCH 8DIP |
2,436 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | with Latch | 1 | Complementary, TTL | 5V ~ 10V | 2mV @ ±5V | 5µA @ ±5V | 20mA | 10mA | 110dB CMRR, 100dB PSRR | 14ns | - | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
MAX923ESAIC COMPARATOR 2 W/VOLT REF 8SOIC |
4,198 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | - | Tube | Obsolete | with Voltage Reference | 2 | CMOS, TTL | 2.5V ~ 11V, ±1.25V ~ 5.5V | 10mV @ 5V | - | 50mA | 7.5µA | 80dB CMRR, 80dB PSRR | 12µs | 50mV | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX923EPAIC COMPARATOR 2 W/VOLT REF 8DIP |
3,688 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | with Voltage Reference | 2 | CMOS, TTL | 2.5V ~ 11V, ±1.25V ~ 5.5V | 10mV @ 5V | - | 50mA | 7.5µA | 80dB CMRR, 80dB PSRR | 12µs | 50mV | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Comparators components used for?
Comparators components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Comparators part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Comparators parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
