Fixed Inductors
Review Fixed Inductors Inductors, Coils, Chokes components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Material - Core | Inductance | Tolerance | Current Rating (Amps) | Current - Saturation (Isat) | Shielding | DC Resistance (DCR) | Q @ Freq | Frequency - Self Resonant | Ratings | Operating Temperature | Inductance Frequency - Test | Features | Mounting Type | Supplier Device Package | Size / Dimension | Height - Seated (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
050AT1003VCVERT TOROIDAL CHOKE |
2,100 |
|
Datasheet | ATVC | Radial, Vertical | Bulk | Active | Toroidal | - | 100 µH | ±10% | 3.14 A | 2.2A | Shielded | 55mOhm Max | - | 2.5MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 0.750" L x 0.400" W (19.05mm x 10.16mm) | 0.312" (7.92mm) |
|
|
121AT5002VCVERT TOROIDAL CHOKE |
1,065 |
|
Datasheet | ATVC | Radial, Vertical | Bulk | Active | Toroidal | - | 50 µH | ±10% | 4.77 A | 6A | Shielded | 30mOhm Max | - | 3.5MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 0.800" L x 0.500" W (20.32mm x 12.70mm) | 0.312" (7.92mm) |
|
|
051T2005HIGH INDUCTANCE TOROID INDUCTOR |
2,023 |
|
Datasheet | T-Small | Radial | Bulk | Active | Toroidal | - | 20 mH | ±2% | 74 mA | - | Unshielded | 22Ohm Max | - | 180kHz | - | -40°C ~ 105°C | 1 kHz | - | Through Hole | Radial | 0.700" Dia (17.78mm) | 0.400" (10.16mm) |
|
|
051T5005HIGH INDUCTANCE TOROID INDUCTOR |
1,920 |
|
Datasheet | T-Small | Radial | Bulk | Active | Toroidal | - | 50 mH | ±2% | 47 mA | - | Unshielded | 55Ohm Max | - | 100kHz | - | -40°C ~ 105°C | 1 kHz | - | Through Hole | Radial | 0.700" Dia (17.78mm) | 0.400" (10.16mm) |
|
|
047T3006HIGH INDUCTANCE TOROID INDUCTOR |
2,532 |
|
Datasheet | - | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
C225FL5740G6BROADBAND CONICAL INDUCTOR |
1,988 |
|
Datasheet | C225FL | Radial, Horizontal Cylinder | Bulk | Active | - | Iron Powder | 2.4 µH | - | 251 mA | - | Unshielded | 800mOhm Max | - | - | - | -55°C ~ 125°C | 10 MHz | - | Through Hole | Radial | 0.070" Dia x 0.225" L (1.78mm x 5.72mm) | - |
|
|
121KM7502HMHORIZ STANDOFF TOROIDAL CHOKE |
1,836 |
|
Datasheet | KMHM | Radial, Horizontal Cylinder (Open) | Bulk | Active | Toroidal | - | 75 µH | ±10% | 3.9 A | 3.1A | Shielded | 45mOhm Max | - | 3MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 0.900" Dia (22.86mm) | 0.500" (12.70mm) |
|
|
5A502RADIAL-LEADED HIGH CURRENT CHOKE |
4,568 |
|
Datasheet | A | Radial, Horizontal Cylinder | Bulk | Active | Wirewound | Ferrite | 50 µH | ±10% | 5 A | - | Unshielded | 30mOhm | - | 4MHz | - | -55°C ~ 125°C | 1 kHz | - | Through Hole | Radial | 0.875" Dia x 1.125" L (22.23mm x 28.58mm) | - |
|
|
121KM2503HMHORIZ STANDOFF TOROIDAL CHOKE |
3,196 |
|
Datasheet | KMHM | Radial, Horizontal Cylinder (Open) | Bulk | Active | Toroidal | - | 250 µH | ±10% | 2.07 A | 1.7A | Shielded | 160mOhm Max | - | 1MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 0.900" Dia (22.86mm) | 0.500" (12.70mm) |
|
|
121KM5002HCHORIZONTAL TOROIDAL CHOKE |
1,276 |
|
Datasheet | KMHC | Radial, Horizontal (Open) | Bulk | Active | Toroidal | - | 50 µH | ±10% | 4.77 A | 4A | Shielded | 30mOhm Max | - | 2.5MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 0.950" Dia (24.13mm) | 0.550" (13.97mm) |
Frequently Asked Questions
What are Fixed Inductors components used for?
Fixed Inductors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Fixed Inductors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Fixed Inductors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
