Fixed Inductors
Review Fixed Inductors Inductors, Coils, Chokes components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Material - Core | Inductance | Tolerance | Current Rating (Amps) | Current - Saturation (Isat) | Shielding | DC Resistance (DCR) | Q @ Freq | Frequency - Self Resonant | Ratings | Operating Temperature | Inductance Frequency - Test | Features | Mounting Type | Supplier Device Package | Size / Dimension | Height - Seated (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ER15M561JRM39010 LEV-R AXIAL INDUCTOR |
2,956 |
|
Datasheet | ER15M | Axial | Tape & Reel (TR) | Active | Molded | Iron Powder | 5.6 µH | ±5% | 495 mA | - | Unshielded | 320mOhm Max | 45 @ 7.9MHz | 60MHz | - | -55°C ~ 105°C | 7.9 MHz | - | Through Hole | Axial | 0.156" Dia x 0.375" L (3.96mm x 9.52mm) | - |
|
|
ER15M221JRM39010 LEV-R AXIAL INDUCTOR |
2,581 |
|
Datasheet | ER15M | Axial | Tape & Reel (TR) | Active | Molded | Phenolic | 2.2 µH | ±5% | 435 mA | - | Unshielded | 950mOhm Max | 33 @ 7.9MHz | 135MHz | - | -55°C ~ 125°C | 7.9 MHz | - | Through Hole | Axial | 0.156" Dia x 0.375" L (3.96mm x 9.52mm) | - |
|
|
050AT3303SMLFWIREWOUND TOROIDAL INDUCTOR |
2,226 |
|
Datasheet | ATSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 330 µH | ±10% | 1.69 A | 1.2A | Shielded | 190mOhm Max | - | 1MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.700" L x 0.670" W (17.78mm x 17.02mm) | 0.405" (10.28mm) |
|
|
050KM1003SMLFTOROIDAL INDUCTOR |
3,483 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 100 µH | ±10% | 3.14 A | 960mA | Shielded | 55mOhm Max | - | 4MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.700" L x 0.670" W (17.78mm x 17.02mm) | 0.405" (10.28mm) |
|
|
LC44-4052SMTOROIDAL INDUCTOR |
3,226 |
|
Datasheet | LCSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 14 µH | ±20% | 2.5 A | - | Shielded | 85mOhm Max | - | 1.3MHz | - | -30°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.615" L x 0.590" W (15.62mm x 14.99mm) | 0.390" (9.91mm) |
|
|
050KM7502SMTOROIDAL INDUCTOR |
4,699 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 75 µH | ±10% | 3.47 A | 1.1A | Shielded | 45mOhm Max | - | 5MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.700" L x 0.670" W (17.78mm x 17.02mm) | 0.405" (10.28mm) |
|
|
050KM5002SMTOROIDAL INDUCTOR |
3,530 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 50 µH | ±10% | 3.93 A | 1.3A | Shielded | 35mOhm Max | - | 7MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.700" L x 0.670" W (17.78mm x 17.02mm) | 0.405" (10.28mm) |
|
|
050KM5002HMHORIZ STANDOFF TOROIDAL CHOKE |
2,551 |
|
Datasheet | KMHM | Radial, Horizontal Cylinder (Open) | Bulk | Active | Toroidal | - | 50 µH | ±10% | 3.93 A | 1.3A | Shielded | 35mOhm Max | - | 7MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 0.660" Dia (16.76mm) | 0.420" (10.67mm) |
|
|
SMRF1010-033KEPOXY-COATED CHIP INDUCTOR |
1,407 |
|
Datasheet | SMRF1010 | Nonstandard | Tape & Reel (TR) | Active | Wirewound | Phenolic | 33 nH | ±10% | 900 mA | - | Unshielded | 120mOhm Max | 48 @ 50MHz | 1.45GHz | - | -55°C ~ 125°C | 50 MHz | - | Surface Mount | - | 0.100" L x 0.100" W (2.54mm x 2.54mm) | 0.085" (2.16mm) |
|
|
SMP5022-683MMOLDED UNSHIELDED INDUCTOR |
1,987 |
|
Datasheet | SMP5022 | Nonstandard | Tape & Reel (TR) | Active | Molded | Ferrite | 680 µH | ±20% | 720 mA | 1.4A | Unshielded | 1.1Ohm Max | - | - | - | -55°C ~ 125°C | 100 kHz | - | Surface Mount | - | 0.750" L x 0.620" W (19.04mm x 15.74mm) | 0.280" (7.11mm) |
Frequently Asked Questions
What are Fixed Inductors components used for?
Fixed Inductors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Fixed Inductors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Fixed Inductors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
