DSP (Digital Signal Processors)
Review DSP (Digital Signal Processors) Embedded components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Interface | Clock Rate | Non-Volatile Memory | On-Chip RAM | Voltage - I/O | Voltage - Core | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADSP-21569BBCZ101000 MHZ SHARC WITH DDR IN A BGA |
1,012 |
|
Datasheet | SHARC® | 400-LBGA, CSPBGA | Tray | Active | Fixed/Floating Point | DDR3, DDR3L, I2C, Link Port, QSPI, SPDIF, SPI, SPORT, UART/USART | 1GHz | OTP (896B) | 1.625MB | 3.30V | 1.00V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 400-CSPBGA (17x17) |
|
ADSP-BF537BBCZ-5BVIC DSP CTLR 16BIT 208CSBGA |
3,709 |
|
Datasheet | Blackfin® | 208-FBGA, CSPBGA | Tray | Active | Fixed Point | CAN, SPI, SSP, TWI, UART | 533MHz | External | 132kB | 3.30V | 1.25V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 208-CSPBGA (17x17) |
|
ADSP-SC598KBPZ10SHARC+ WITH CORTEX A55 1 GHZ |
2,328 |
|
Datasheet | SHARC® | 400-FBGA | Tray | Active | Fixed/Floating Point | CAN, DDR2, DDR3, EBI/EMI, Ethernet, DAI, I2C, SPI, SPORT, UART/USART, USB OTG | 1GHz, 1.2GHz | External | 2MB | 3.30V | 1V | 0°C ~ 125°C (TJ) | - | - | Surface Mount | 400-BGA (17x17) |
|
ADSP-21369BSWZ-2AIC DSP 32BIT 333MHZ 208-LQFP |
1,609 |
|
Datasheet | SHARC® | 208-LQFP Exposed Pad | Tray | Active | Floating Point | DAI, DPI | 333MHz | ROM (768kB) | 256kB | 3.30V | 1.20V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 208-LQFP-EP (28x28) |
|
ADSP-21478KSWZ-1AIC DSP SHARC 200MHZ LP 100LQFP |
2,258 |
|
Datasheet | SHARC® | 100-LQFP Exposed Pad | Tray | Active | Floating Point | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART | 200MHz | ROM (4Mbit) | 3Mbit | 3.30V | 1.20V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 100-LQFP-EP (14x14) |
|
|
ADSP-21488KSWZ-4AIC CCD SIGNAL PROCESSOR 100LQFP |
3,760 |
|
Datasheet | SHARC® | 100-LQFP Exposed Pad | Tray | Active | Floating Point | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART | 400MHz | External | 3Mbit | 3.30V | 1.10V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 100-LQFP-EP (14x14) |
|
|
ADSP-BF536BBCZ-3BIC DSP CTLR 16BIT 208CSBGA |
3,979 |
|
Datasheet | Blackfin® | 208-FBGA, CSPBGA | Tray | Active | Fixed Point | CAN, SPI, SSP, TWI, UART | 300MHz | External | 100kB | 2.50V, 3.30V | 1.20V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 208-CSPBGA (17x17) |
|
ADSP-21565KSWZ8800 MHZ SHARC IN AN LQFP PACKAGE |
4,955 |
|
Datasheet | SHARC® | 120-LQFP Exposed Pad | Tray | Active | Fixed/Floating Point | DDR3, DDR3L, I2C, Link Port, QSPI, SPDIF, SPI, SPORT, UART/USART | 800MHz | OTP (896B) | 1.625MB | 3.30V | 1.00V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 120-LQFP-EP (14x14) |
|
|
ADSP-21565KSWZ101000 MGHZ SHARC IN AN LQFP PACKA |
2,791 |
|
Datasheet | SHARC® | 120-LQFP Exposed Pad | Tray | Active | Fixed/Floating Point | DDR3, DDR3L, I2C, Link Port, QSPI, SPDIF, SPI, SPORT, UART/USART | 1GHz | OTP (896B) | 1.625MB | 3.30V | 1.00V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 120-LQFP-EP (14x14) |
|
ADSP-BF533SBSTZ400IC DSP CTLR 16BIT 400MHZ 176LQFP |
2,969 |
|
Datasheet | Blackfin® | 176-LQFP | Tray | Active | Fixed Point | SPI, SSP, UART | 400MHz | ROM (1kB) | 148kB | 3.30V | 1.20V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 176-LQFP (24x24) |
Frequently Asked Questions
What are DSP (Digital Signal Processors) components used for?
DSP (Digital Signal Processors) components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right DSP (Digital Signal Processors) part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find DSP (Digital Signal Processors) parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
