DSP (Digital Signal Processors)
Review DSP (Digital Signal Processors) Embedded components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Interface | Clock Rate | Non-Volatile Memory | On-Chip RAM | Voltage - I/O | Voltage - Core | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
DS2165QIC PROC ADPCM 16/24/32K 28-PLCC |
3,432 |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | ADPCM | ADPCM, PCM | 10MHz | - | - | 5.00V | 5.00V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
DS2165Q+T&RIC PROC ADPCM 16/24/32K 28-PLCC |
4,544 |
|
Datasheet | - | 28-LCC (J-Lead) | Tape & Reel (TR) | Obsolete | ADPCM | ADPCM, PCM | 10MHz | - | - | 5.00V | 5.00V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
DS2165NDS2165 16/24/32 KILO BITS PER SE |
276 |
|
Datasheet | - | 24-DIP (0.600", 15.24mm) | Bulk | Active | ADPCM | PCM, TDM | 10MHz | - | - | 5V | 5V | 0°C ~ 70°C (TA) | - | - | Through Hole | 24-PDIP |
|
|
DS216532 KB PER SECOND ADPCM PROCESSOR |
1,207 |
|
Datasheet | - | 28-LCC (J-Lead) | Bulk | Active | ADPCM | PCM, TDM | 10MHz | - | - | 5V | 5V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
DS2167IC PROC ADPCM 16/24/32K 24-DIP |
4,370 |
|
Datasheet | - | 24-DIP (0.600", 15.24mm) | Tube | Obsolete | ADPCM | ADPCM, PCM | 10MHz | - | - | 5.00V | 5.00V | 0°C ~ 70°C (TA) | - | - | Through Hole | 24-PDIP |
|
|
DS2165QNIC PROC ADPCM 16/24/32K 28-PLCC |
4,940 |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | ADPCM | ADPCM, PCM | 10MHz | - | - | 5.00V | 5.00V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
DS2165QN+IC PROC ADPCM 16/24/32K 28-PLCC |
2,844 |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | ADPCM | ADPCM, PCM | 10MHz | - | - | 5.00V | 5.00V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
Frequently Asked Questions
What are DSP (Digital Signal Processors) components used for?
DSP (Digital Signal Processors) components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right DSP (Digital Signal Processors) part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find DSP (Digital Signal Processors) parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
