Digital Potentiometers
Review Digital Potentiometers Data Acquisition components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Programmable | Taper | Configuration | Number of Circuits | Number of Taps | Resistance (Ohms) | Interface | Memory Type | Voltage - Supply | Features | Tolerance | Temperature Coefficient (Typ) | Mounting Type | Grade | Qualification | Supplier Device Package | Operating Temperature | Resistance - Wiper (Ohms) (Typ) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX5418LETA+IC DGTL POT 100KOHM 256TAP 8TDFN |
2,498 |
|
Datasheet | - | 8-WDFN Exposed Pad | Strip | Active | Not Verified | Linear | Potentiometer | 1 | 256 | 100k | I2C | Non-Volatile | 2.7V ~ 5.25V | Selectable Address | - | 35ppm/°C | Surface Mount | - | - | 8-TDFN (3x3) | -40°C ~ 85°C | 325 |
|
MAX5487ETE+IC DGT POT 10KOHM 256TAP 16TQFN |
3,352 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Strip | Active | Not Verified | Linear | Potentiometer | 2 | 256 | 10k | SPI | Non-Volatile | 2.7V ~ 5.25V | - | ±25% | 35ppm/°C | Surface Mount | - | - | 16-TQFN (3x3) | -40°C ~ 85°C | 325 |
|
|
MAX5386MATE+IC DGT POT 50KOHM 256TAP 16TQFN |
3,617 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Strip | Active | Not Verified | Linear | Potentiometer | 2 | 256 | 50k | SPI | Volatile | 2.6V ~ 5.5V | - | ±25% | 35ppm/°C | Surface Mount | - | - | 16-TQFN (3x3) | -40°C ~ 125°C | 250 |
|
MAX5461EXT32-TAP FLEAPOT, 2-WIRE DIGIPOT |
869 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Bulk | Active | Not Verified | Linear | Rheostat | 1 | 32 | 100k | I2C, Up/Down (U/D, CS) | Volatile | 2.7V ~ 5.5V | - | - | 35ppm/°C | Surface Mount | - | - | SC-70-6 | -40°C ~ 85°C | - |
|
MAX5161NEZTMAX5161 LOW-POWER DIGIPOT |
445 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Bulk | Active | Not Verified | Linear | Potentiometer | 1 | 32 | 200k | Up/Down (U/D, INC, CS) | Volatile | 2.7V ~ 5.5V | - | ±25% | 50ppm/°C | Surface Mount | - | - | TSOT-23-6 | -40°C ~ 85°C | 400 |
|
DS1856E-050DUAL TEMP-CONTROLLED RESISTOR |
3,072 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Bulk | Active | - | Linear | Rheostat | 2 | 256 | 50k | I2C | Non-Volatile | 2.85V ~ 5.5V | Temperature Sensor | - | 50ppm/°C | Surface Mount | - | - | 16-TSSOP | -40°C ~ 95°C | - |
|
MAX5477EUD+TIC DGT POT 10KOHM 256TAP 14TSSOP |
4,480 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Not Verified | Linear | Potentiometer | 2 | 256 | 10k | I2C | Non-Volatile | 2.7V ~ 5.25V | Selectable Address | ±25% | 70ppm/°C | Surface Mount | - | - | 14-TSSOP | -40°C ~ 85°C | 325 |
|
|
MAX5419PETA+IC POT DGTL 256-TAP I2C 8-TDFN |
1,358 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tube | Active | Not Verified | Linear | Potentiometer | 1 | 256 | 200k | I2C | Non-Volatile | 2.7V ~ 5.25V | Selectable Address | ±25% | 35ppm/°C | Surface Mount | - | - | 8-TDFN (3x3) | -40°C ~ 85°C | 325 |
|
MAX5431BEUB+IC VOLTAGE DIVIDER PGA 10-UMAX |
3,183 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Not Verified | Linear | Potentiometer | 1 | 4 | 57k | Parallel | Volatile | 12V ~ 15V, ±12V ~ 15V | - | - | - | Surface Mount | - | - | 10-uMAX/uSOP | -40°C ~ 85°C | 14 |
|
|
MAX5386NATE+IC DGT POT 100KOHM 256TAP 16TQFN |
2,757 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Strip | Active | Not Verified | Linear | Potentiometer | 2 | 256 | 100k | SPI | Volatile | 2.6V ~ 5.5V | - | ±25% | 35ppm/°C | Surface Mount | - | - | 16-TQFN (3x3) | -40°C ~ 125°C | 250 |
Frequently Asked Questions
What are Digital Potentiometers components used for?
Digital Potentiometers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Digital Potentiometers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Digital Potentiometers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
